Haven full-color LED lighting gives you in-deck lights flush in the surface, riser lights washing each stair tread, post-cap lights glowing on the railing, and landscape zones reaching into the planting beds — warm white for dinner, soft amber for a quiet night, a team color for a party, all from your phone.
All of that wiring lives inside the structure, and once the boards are down the structure is sealed. When lighting is designed up front, the wire runs hide cleanly in the framing, the transformers are sized for the whole system, and every fixture lands exactly where it belongs: even light, safe stairs, not a wire in sight.
Retrofits show their seams — surface-mounted wire chases, fixtures screwed wherever a wire could reach, voltage drop dimming the far lights, holes drilled through finished boards. We plan it once and do it right, as Haven Lighting Certified Installers.

Every stair tread washed with riser light, because stairs after dark are the first safety question on any elevated deck. Post-cap fixtures that define the perimeter without glare. In-deck fixtures placed for circulation paths rather than scattered decoration. Landscape zones that reach the trees and beds, so the property reads as one composed scene instead of a lit platform in a dark yard.
Low-voltage wiring is roughed in during framing alongside the deck structure itself, the same pass in which we tape and cap the joists — one of the reasons lighting belongs in the original design conversation, not the punch list.
Engineering and building permits are included in every project, and the lighting plan rides inside the same drawings.
It can, but it shows: surface-mounted chases, voltage drop, fixtures where wires could reach instead of where design wants them. The wiring belongs inside the structure before the boards go down — which is why we design lighting up front on every build.
Warm white for dinner, soft amber for late evenings, full color for occasions — scenes and zones controlled from your phone. Risers, post caps, in-deck fixtures, and landscape zones can each run their own program.
No — when it is planned during framing. The wire runs hide in the structure, the fixtures sit flush, and the deck system itself stays exactly as engineered and warrantied.
Trex Signature Railing · Under-Deck Living · Haven Lighting Guide · What Haven Does to a Deck After Dark · Case Study: Hudson Horizon Haven · Orange County · Dutchess County
Every build starts with a design consultation. Engineering and building permits are included in every project — never a line item.